Styccobond B95 High Performance, Flexible Wood Flooring Adhesive 8KG

DELIVERY RESTRICTION ON THIS PRODUCT

This can only be shipped to commercial business addresses.

The courier will not deliver to a residential address.

STYCCOBOND B95 is a high performance, one part, flexible, moisture curing polyurethane adhesive used for installing a wide range of wood floorcoverings. It is non-flammable and is quick setting to develop a high bond strength. It is protected against bio-degradation and suitable for use over normal underfloor heating.

STYCCOBOND B95 can be used for securing engineered boards (semi-solids) and a wide range of plank and wood strip flooring.

STYCCOBOND B95 can be applied to STOPGAP levelling compounds, structurally sound, smooth, dry subfloors of concrete, sand/cement screed and plywood (Minimum 6mm flooring grade WBP).

Sound asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP levelling compounds.

STYCCOBOND B95 can also be applied directly to STOPGAP waterproof surface membranes within 24 hours of the membrane curing.

SURFACE PREPARATION

Proper subfloor preparation is essential for the correct installation of any floorcovering. Subfloors must be structurally sound, smooth, dry (<65% RH) and free from laitance and any contaminants which will affect adhesion. Use STYCCOCLEAN C140 for removing grease, oil, polish, soap etc. from non-absorbent substrates.

Concrete and sand/cement screeds must be fully cured and any laitance or surface treatments must be removed.The temperature of the floor must be maintained above 10°C throughout the application and drying of the adhesive. Underfloor heating must be off for at least 48 hours before, during and after application.

For detailed information, request our Subfloor Preparation Guide.

DAMP SUBFLOORS

Prior to the installation of a wood floorcovering the Relative Humidity of the subfloor should be checked using a Hygrometer. F. Ball would always recommend a RH value of 65% or less, however the wood flooring manufacturer should also be consulted.

Where necessary, treat with the appropriate STOPGAP waterproof surface membrane.

TECHNICAL INFORMATION

• Note: Coverage rates will depend on the condition and absorbency of the subfloor.