Styccobond F3 Flooring Adhesive 15ltr 45m2

DELIVERY RESTRICTION ON THIS PRODUCT

This can only be shipped to commercial business addresses.

The courier will not deliver to a residential address.

Please note, we are unable to offer an AM delivery service for this product. 

STYCCOBOND F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.

STYCCOBOND F3 can be used for securing fibre bonded carpets, hessian, felt, secondary latex and rubber foam backed carpets and cork tiles up to 3.2mm thick.

See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F3 has been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations.

STYCCOBOND F3 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.

STOPGAP waterproof surface membranes, sound flooring grade asphalt and some non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

STYCCOBOND F3 can be applied directly to some non-absorbent subfloors such as Power Floated Concrete, Terrazzo and Granolithic, however, impervious backed floorcoverings should not be adhered directly to these subfloors and a suitable STOPGAP smoothing underlayment should be applied.

For details on other subfloors, contact our Technical Service Department.