Styccobond F54 High Grab Linoleum Adhesive 15 LITRE

DELIVERY RESTRICTION ON THIS PRODUCT

This can only be shipped to commercial business addresses.

The courier will not deliver to a residential address.

INTRODUCTION

STYCCOBOND F54 is a solvent free emulsion adhesive for installing linoleum floorcoverings. It is designed to provide a high initial grab. It is protected against bio- degradation and is suitable for use over normal underfloor heating installations.

STYCCOBOND F54 can be used for securing a wide range of linoleum sheet and tile floorcoverings.

See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F54 has been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations.

STYCCOBOND F54 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.

STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

For details on other subfloors, contact our Technical Service Department.

TECHNICAL INFORMATION