Categories
Categories
- Home
- Adhesives & Sealants
- Carpet Adhesive
- Styccobond F66 Solvent Free Contact Adhesive 5 LITRE
Styccobond F66 Solvent Free Contact Adhesive 5 LITRE
Styccobond F66 Solvent Free Contact Adhesive 5 LITRE
Product Description
STYCCOBOND F66 is a solvent free contact adhesive providing a safer alternative to conventional solvent based products. The adhesive should be applied by notched spreader and/or sponge applicator. The adhesive is suitable for use over normal underfloor heating. The formation of an instant bond makes it particularly suitable for use on vertical surfaces.
STYCCOBOND F66 can be used for securing PVC and rubber edgings, covings and nosings, floor and wallcoverings with backings of PVC, rubber, cork and most textiles.
Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings and wallcoverings.
Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate smoothing underlayment.
STYCCOBOND F66 has been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations. USCG approval No. 164/112/1121/WCL MED0404.
STYCCOBOND F66 can be used on substrates of Plaster, Cement Render, Wood, Stone, Metal and UPVC.
For details on other surfaces, contact our Technical Service Department.
TECHNICAL INFORMATION
Colour |
White |
Consistency |
Creamy |
Coverage Rates (Approx.) |
5m2 per litre per coat or 125 linear metres of 100mm wide coving per 5 litres with a notched spreader |
Open Time |
After application leave the adhesive to dry for approx. 30 to 40 minutes. The two surfaces can then be pressed together within the next 7 hours. If open time exceeds 7 hours heat reactivation may be used. |
Drying Time |
From 30 minutes |